https://community.hpe.com/t5/m-and-msm-series/problem-with-msm320-access-point-configuration/m-p/4503924#M2483 what i would do is check your ip routes and make sure you put in your default gateway. Mon, 28 Sep 2009 16:21:12 GMT groque 2009-09-28T16:21:12Z https://community.hpe.com/t5/m-and-msm-series/problem-with-msm320-access-point-configuration/m-p/4503923#M2482 <P>Hi,<BR />We are Installing new Wireless setup.We using Hp MSM320 Access Point in Stand-alone Autonomous Mode.We have only one VLAN 1 IP Subnet 192.168.0.0/24.We Configure AP bridge port ip 192.168.0.180 &amp; created SSID.<BR />Now the problem is this i can see SSID in our wireless network then i given sataic IP address to my PC in same subnet &amp; try to connect it's connecting successfully but i unable to ping AP ip &amp; unable to browse internet.<BR /><BR /></P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator</P> Sun, 01 Dec 2013 15:25:33 GMT https://community.hpe.com/t5/m-and-msm-series/problem-with-msm320-access-point-configuration/m-p/4503923#M2482 kamal naveed 2013-12-01T15:25:33Z https://community.hpe.com/t5/m-and-msm-series/problem-with-msm320-access-point-configuration/m-p/4503924#M2483 what i would do is check your ip routes and make sure you put in your default gateway. Mon, 28 Sep 2009 16:21:12 GMT https://community.hpe.com/t5/m-and-msm-series/problem-with-msm320-access-point-configuration/m-p/4503924#M2483 groque 2009-09-28T16:21:12Z https://community.hpe.com/t5/m-and-msm-series/problem-with-msm320-access-point-configuration/m-p/4503925#M2484 i have only 1 vlan through LAN network everything is working fine only having problem with wireless &amp; default gateway is already configured. Mon, 28 Sep 2009 17:34:45 GMT https://community.hpe.com/t5/m-and-msm-series/problem-with-msm320-access-point-configuration/m-p/4503925#M2484 kamal naveed 2009-09-28T17:34:45Z