https://community.hpe.com/t5/m-and-msm-series/msm320-with-5-3-5-firmware-failure-with-hp750-controllers/m-p/4783909#M2546 <P>We’ve run into a situation at where we’ve seen the newer “Enhanced” HP APs give firmware failure messages when trying to sync with a HP 750 model MSC controller running 5.3.5 firmware. These same radios will then sync properly with a 760 model controller running the exact same firmware as the 750 model controller. Any work around or solutions?</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved&nbsp;from Communications, Wireless (Legacy ITRC forum) to MSM Series. - Hp Forum moderator</P> Mon, 02 Dec 2013 03:21:53 GMT Dennis Hastings 2013-12-02T03:21:53Z https://community.hpe.com/t5/m-and-msm-series/msm320-with-5-3-5-firmware-failure-with-hp750-controllers/m-p/4783909#M2546 <P>We’ve run into a situation at where we’ve seen the newer “Enhanced” HP APs give firmware failure messages when trying to sync with a HP 750 model MSC controller running 5.3.5 firmware. These same radios will then sync properly with a 760 model controller running the exact same firmware as the 750 model controller. Any work around or solutions?</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved&nbsp;from Communications, Wireless (Legacy ITRC forum) to MSM Series. - Hp Forum moderator</P> Mon, 02 Dec 2013 03:21:53 GMT https://community.hpe.com/t5/m-and-msm-series/msm320-with-5-3-5-firmware-failure-with-hp750-controllers/m-p/4783909#M2546 Dennis Hastings 2013-12-02T03:21:53Z