How to add CA certificates for HTML authentication

hsg — Mon, 02 Dec 2013 04:17:09 GMT

We have an MSM760 that we are setting up for guest access. We have a custom certificate, that is based on a root and an intermediate certificate.
I add the certificate to the "Certificate and private key store", the Root-CA and the intermediate ceritificate "Trusted CA certificate store".
But I cannot add the root and intermediate certificate as peer authentication unter "Certificate usage"->"HTML authentication". The text says "Peer authentication is not possible with this service". So, the browser shows up the "untrusted website"-page, because it doesn't know about the two CA certificates.
How can I add the root and intermediate certificate to the HTML authentication?

P.S. This thread has been moevd from Communications, Wireless (Legacy ITRC forum) to MSM Series. - Hp Forum Moderator

Re: How to add CA certificates for HTML authentication

Holger Hasenaug — Sun, 27 Mar 2011 17:47:02 GMT

You may check this one:

ftp://ftp.hp.com/pub/networking/software/How-to-create-SSL-certificates.zip

Re: How to add CA certificates for HTML authentication

hsg — Mon, 28 Mar 2011 07:44:41 GMT

The certificate chain made it. Thanks a lot for help.

topic How to add CA certificates for HTML authentication in M and MSM Series

How to add CA certificates for HTML authentication

Re: How to add CA certificates for HTML authentication

Re: How to add CA certificates for HTML authentication