topic Re: MSM760 won't relay DHCP in M and MSM Series

MSM760 won't relay DHCP

Mitch Reed — Mon, 02 Dec 2013 07:55:47 GMT

This thing is about to drive me nuts. I can only get the HTML authentication to work when I turn on the DHCP server of the MSM760, and then it only works for local clients and not AD. When I try to relay to our existing DHCP (Server 2008 R2) the clients do not get an address. I can ping the DHCP (DNS and DC) server from the 760. DHCP works fine until I turn on the "tunnel all traffic" and then I never get DHCP. The VSC I am trying this on is on the same VLAN as the 760 lan port & DHCP server for simplicity sake.

Attached is a map of the network as it stands.

Any ideas???

P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator

Re: MSM760 won't relay DHCP

Tim Maxwell — Fri, 13 Aug 2010 02:01:32 GMT

What version of firmware are you running?

Re: MSM760 won't relay DHCP

Mitch Reed — Fri, 13 Aug 2010 02:52:58 GMT

Firmware 5.3.3.83-01-7739-A

Re: MSM760 won't relay DHCP

Tim Maxwell — Sat, 14 Aug 2010 02:53:42 GMT

Do you have the box checked to allow wireless clients to talk with wired? It would be in you VSC setting.

Re: MSM760 won't relay DHCP

Mitch Reed — Mon, 16 Aug 2010 11:23:03 GMT

Yes the "Allow traffic between wired clients and tunneled wireless clients" box is checked but it still will not relay the DHCP information.