https://community.hpe.com/t5/m-and-msm-series/msm710-with-more-than-10-access-points/m-p/4673671#M3171 If you will add up a lot of APs then just upgrade to MSM760. (Base support 40 APs)<BR />If you just need to add a few more (may be &lt;10 add up) then just buy another unit of MSM710 will do.<BR />Manual provision the APs to discover the secondary MSM710 controller. Let's said 10 unit to primary controller and 10 unit to another secondary controller. Set both controller VSC &amp; SSID to the same name (make it transparent to user)<BR />For non Access Controller VSC, you will have no problem (because you just egress the VLAN ID in when user authenticated). <BR />For Access Controller VSC, need to make sure the local account you add in primary will be updating in secondary as well.<BR />Others, I think overall is OK. This will be cost saving way.<BR /> Thu, 12 Aug 2010 09:11:46 GMT kianwei 2010-08-12T09:11:46Z https://community.hpe.com/t5/m-and-msm-series/msm710-with-more-than-10-access-points/m-p/4673670#M3170 <P>I have some access points with MSM710, but now we have some new space to cover.<BR /><BR />If I get the 11th access point, do I then have no choice but update to MSM760? Or can I just double up and get another MSM710?</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Communications, Wireless (Legacy ITRC forum) to MSM Series. -HP Forum Moderator</P> Mon, 02 Dec 2013 08:04:34 GMT https://community.hpe.com/t5/m-and-msm-series/msm710-with-more-than-10-access-points/m-p/4673670#M3170 Mikko Peltoniemi 2013-12-02T08:04:34Z https://community.hpe.com/t5/m-and-msm-series/msm710-with-more-than-10-access-points/m-p/4673671#M3171 If you will add up a lot of APs then just upgrade to MSM760. (Base support 40 APs)<BR />If you just need to add a few more (may be &lt;10 add up) then just buy another unit of MSM710 will do.<BR />Manual provision the APs to discover the secondary MSM710 controller. Let's said 10 unit to primary controller and 10 unit to another secondary controller. Set both controller VSC &amp; SSID to the same name (make it transparent to user)<BR />For non Access Controller VSC, you will have no problem (because you just egress the VLAN ID in when user authenticated). <BR />For Access Controller VSC, need to make sure the local account you add in primary will be updating in secondary as well.<BR />Others, I think overall is OK. This will be cost saving way.<BR /> Thu, 12 Aug 2010 09:11:46 GMT https://community.hpe.com/t5/m-and-msm-series/msm710-with-more-than-10-access-points/m-p/4673671#M3171 kianwei 2010-08-12T09:11:46Z