https://community.hpe.com/t5/m-and-msm-series/hp-msm-controller-760-setup/m-p/4727425#M3183 Hello!<BR /><BR />I haven't given up just yet, but soon...<BR /><BR />I have a LAN Port for my internal access to the webbrowser of the msm controller<BR /><BR />I have setup The Internet port for accepting VLAN only. When I trunk the ports on the switch The Internet Port is connected to, I get a lot of love from the different vlans. I get ip info which fits the vlans.<BR /><BR />How should I set up the switch for <BR /><BR />a) the hp msm controllers Lan Port. I assume that I need to untag the actual vlan the msm controller is connected to (LAN port).<BR /><BR />b) The Internet Port. This supports VLAN traffic only. I assume that I just trunk (tag) the vlans I want to be accessible.<BR /><BR />c) The AP. How do I set up the AP's so it gives me the right IP, gateway address and so on? <BR /><BR />do I set up the VSC profile with authentication and access control from the Service controller?<BR /><BR />do I need anything else in order for the AP to actually work?<BR /><BR />Thanks in advance :-) Thu, 16 Dec 2010 14:12:51 GMT Maclovin 2010-12-16T14:12:51Z https://community.hpe.com/t5/m-and-msm-series/hp-msm-controller-760-setup/m-p/4727425#M3183 Hello!<BR /><BR />I haven't given up just yet, but soon...<BR /><BR />I have a LAN Port for my internal access to the webbrowser of the msm controller<BR /><BR />I have setup The Internet port for accepting VLAN only. When I trunk the ports on the switch The Internet Port is connected to, I get a lot of love from the different vlans. I get ip info which fits the vlans.<BR /><BR />How should I set up the switch for <BR /><BR />a) the hp msm controllers Lan Port. I assume that I need to untag the actual vlan the msm controller is connected to (LAN port).<BR /><BR />b) The Internet Port. This supports VLAN traffic only. I assume that I just trunk (tag) the vlans I want to be accessible.<BR /><BR />c) The AP. How do I set up the AP's so it gives me the right IP, gateway address and so on? <BR /><BR />do I set up the VSC profile with authentication and access control from the Service controller?<BR /><BR />do I need anything else in order for the AP to actually work?<BR /><BR />Thanks in advance :-) Thu, 16 Dec 2010 14:12:51 GMT https://community.hpe.com/t5/m-and-msm-series/hp-msm-controller-760-setup/m-p/4727425#M3183 Maclovin 2010-12-16T14:12:51Z