https://community.hpe.com/t5/m-and-msm-series/msm410-error/m-p/4687418#M3354 I have a MSM410. The colour dots on "port 1" and 3 VLAN is red "Down".<BR />The ather dots is green.<BR />Where can i set these dots to green?<BR />is there something wrong or is there somthing i can do or have i done somthing wrong?<BR />Thanks.<BR /> Thu, 16 Sep 2010 09:37:13 GMT Patrik Holmberg 2010-09-16T09:37:13Z https://community.hpe.com/t5/m-and-msm-series/msm410-error/m-p/4687418#M3354 I have a MSM410. The colour dots on "port 1" and 3 VLAN is red "Down".<BR />The ather dots is green.<BR />Where can i set these dots to green?<BR />is there something wrong or is there somthing i can do or have i done somthing wrong?<BR />Thanks.<BR /> Thu, 16 Sep 2010 09:37:13 GMT https://community.hpe.com/t5/m-and-msm-series/msm410-error/m-p/4687418#M3354 Patrik Holmberg 2010-09-16T09:37:13Z https://community.hpe.com/t5/m-and-msm-series/msm410-error/m-p/4687419#M3355 What other dots do you see as "green"? A screen capture would help me better understand. Could you please upload one in this discussion thread?<BR /><BR />You cannot really set these to "green" it is a matter of having the port physically connected to the network/switch and that have the speed and duplex auto negotiation successful. In case an assuming the port is connected to the network with a physical cable, try setting the speed and duplex manually on the product and the switch so that they match.<BR /><BR /> Wed, 06 Oct 2010 12:50:37 GMT https://community.hpe.com/t5/m-and-msm-series/msm410-error/m-p/4687419#M3355 Fred! 2010-10-06T12:50:37Z