topic Re: AP connected by mesh restart with no reason in M and MSM Series

AP connected by mesh restart with no reason

Marcos Semidán — Tue, 05 Oct 2010 15:48:52 GMT

I have a small mesh network with APMSM320-R. One Master, another one Alternate Master, and the last one Slave. They are all connected to a MSM765zl controller. two or three times a day the Alternate Master and the Slave AP restart without reason aparently. Looking at the log i get the next message:

warning monitord (Serial of the AP) KEEP ALIVE failure on , restar process if running.

Mesh signal is strong between AP's (they transmit at 54Mbps).

Could someone help me?

Need more information?

Thanks in advance

Re: AP connected by mesh restart with no reason

Fred! — Wed, 06 Oct 2010 12:29:16 GMT

Most likely this is a bug, which was most likely fixed in a later/maintenance SW release. What version do you have? You should contact HP support immediately to get the latest maintenance release on your current major SW version.

Re: AP connected by mesh restart with no reason

Marcos Semidán — Wed, 06 Oct 2010 14:14:32 GMT

Right now i have the latest version. (5.4.1). Reading release notes i didn't found anything about my problem in the section "Known issues".

I'm thinking about expand the network, so i hope this problem will be fixed in posterior release.

Thank you.