https://community.hpe.com/t5/m-and-msm-series/msm310/m-p/6429094#M3756 <P>Hi,</P><P>&nbsp;</P><P>SFlowTrend not recieving any packets, no firewall blocks that I can see?</P><P>&nbsp;</P><P>Log on "AP group" of units showing:</P><P>&nbsp;</P><P>Error (2:1190): Sflow Agent, internal error!</P><P>&nbsp;</P><P>Individual unit(s) log file empty.</P><P>&nbsp;</P><P>Anybody have more detail on the above error code please?</P><P>&nbsp;</P><P>Also, some of the units do not list under controller advanced sflow setup, ie enable/disable on a group basis?</P><P>&nbsp;</P><P>Please note:</P><P>&nbsp;</P><P>Firmware versions are the same, the only difference I can see are, board revision on the sflow fails ... is -A , the working -B?&nbsp;</P><P>&nbsp;</P><P>Thanks!</P> Fri, 28 Mar 2014 16:45:07 GMT Broadscape 2014-03-28T16:45:07Z https://community.hpe.com/t5/m-and-msm-series/msm310/m-p/6429094#M3756 <P>Hi,</P><P>&nbsp;</P><P>SFlowTrend not recieving any packets, no firewall blocks that I can see?</P><P>&nbsp;</P><P>Log on "AP group" of units showing:</P><P>&nbsp;</P><P>Error (2:1190): Sflow Agent, internal error!</P><P>&nbsp;</P><P>Individual unit(s) log file empty.</P><P>&nbsp;</P><P>Anybody have more detail on the above error code please?</P><P>&nbsp;</P><P>Also, some of the units do not list under controller advanced sflow setup, ie enable/disable on a group basis?</P><P>&nbsp;</P><P>Please note:</P><P>&nbsp;</P><P>Firmware versions are the same, the only difference I can see are, board revision on the sflow fails ... is -A , the working -B?&nbsp;</P><P>&nbsp;</P><P>Thanks!</P> Fri, 28 Mar 2014 16:45:07 GMT https://community.hpe.com/t5/m-and-msm-series/msm310/m-p/6429094#M3756 Broadscape 2014-03-28T16:45:07Z