Controller - General Configuration

RahulNair — Tue, 15 Jul 2014 06:11:55 GMT

Hi ,

I am proposing a solution , where in i have an HP 830 or HP MSM controller and some 20 odd access points for a campus Wifi Solution .

I have to connect the controller , to their Core Switch .

I need to have 2 SSIDS one for Management users and other for Finance users .

I have a general idea about the configuration and topology to be implemeneted , and want to confim with you guys , as i am relatively new to the HP Ecosystem .

My plan is

A. to dedicate two vlans , 1 for management and 1 for finance .

B. Assuming there is a management VLAN for network devices ( VLAN 1 usually ) , i ll trunk the uplink port on the core switch , and allow three VLANS namely , MGMT (1),MANAG(10),FINAN(20)

C. ( Now this is where i need help as i am new to HP) As i understand i should create 2 VSCs , one for wifimanagement , one for wififinance.

D. Create two network profiles ( besides the built in Internet,Lan profiles).

E. Assign respective Vlans to both ( ie. Vlan 10 and vlan 20 to the two new network profiles)

F.Assign ip address to the two new network profiles.

G. Assign VLAN 1 ip address to the LAN/Internet default profiles.

F. Finally connect the Controller to the Core Switch .

Please correct me of the above menthodology is wrong.

topic Controller - General Configuration in M and MSM Series

Controller - General Configuration