Cannot create multiple DHCP on MSM760 - V6.4.1.0

Sabin808 — Wed, 15 Oct 2014 16:10:37 GMT

HI,

Im trying to configure MSM760 with multiple vlans and multiple SSID's.

Modified the default SSID and configured default DHCP.

Please find the procedures that i did for new SSID :

1. Created new profile and added vlan. Mapped vlan to LAN Port.

2. Created new SSID and linked with the vlan that i created.[VCS Mapping]

3. Created DHCP with proper vlan range [Inside VCS Page]

4. In default profile[All Access points are link with this], mapped the vcs mapping and selected egress mapping.

Problems that im facing:

some time AP are taking ip address from main DHCP and some time SSID Dhcp.

How to link the AP's to main dhcp ?

When im connecting to the new ssid , that geteway that i mention in the VCS DHCP its became the controller ip. I can reach the only the that ip.

How i can reach the default gateway from there ?

Any helps appreciated...

Kindly find the attached backup

topic Cannot create multiple DHCP on MSM760 - V6.4.1.0 in M and MSM Series