No connectivity for wireless users, VLAN - VSC binding issue? (MSM710 Controller with MSM310 APs)

mombix — Fri, 07 Oct 2011 20:07:09 GMT

I've build a network with MSM710 Controller and MSM310 APs. On Conttroller ingrss (LAN Inerface) only is used with Management VLAN untagged and two VLANs for VSCs (wireless Users Guest and Intranet) tagged.

The ports on switch have same config for controller and APs (Management VLAN native and VLANs for VSCs tagged).

The controller software is 5.5.3.0-01-10326. All APs are in inventory up and running.

VSCs are configured with PSK and SSID-broadcast. And network profiles are mapped to ingess port on VSC. In AP-Group-Config the VSC is mapped to egress-port to its VLAN.

When user try to connect the authentication works fine. But no DHCP is working. Test with static IP are aso failed.

Please help!

Thanks in advance!

Tobias

Re: No connectivity for wireless users, VLAN - VSC binding issue? (MSM710 Controller with MSM310 APs

mombix — Sat, 08 Oct 2011 08:14:16 GMT

Hi,

i´ve unchecked in time unsued "Authentication" and "Access control" on VSC --> the WLAN-client is getting IP from my firewall.

After unchecking gatewaybinding the client can work in its mapped VLAN.

the solution works fine for start. Implementing of 802.1x is planned in future. :-)

By Tobias

topic No connectivity for wireless users, VLAN - VSC binding issue? (MSM710 Controller with MSM310 APs) in M and MSM Series

No connectivity for wireless users, VLAN - VSC binding issue? (MSM710 Controller with MSM310 APs)

Re: No connectivity for wireless users, VLAN - VSC binding issue? (MSM710 Controller with MSM310 APs