https://community.hpe.com/t5/m-and-msm-series/convert-controlled-ap-to-autonomous/m-p/6717724#M4221 <P>The MSM720 controller has a lifetime warranty. Why not log a call and get it replaced?</P><P>&nbsp;</P><P>You can set an AP to autonomous mode from the controller (sounds like that is not an option here).</P><P>If you reset the AP, when it restarts, it will have a default IP address 192.168.something. When you log into that address, you can convert to autonomous mode. No special firmware needed!</P> Mon, 09 Mar 2015 10:13:10 GMT Richard Litchfield 2015-03-09T10:13:10Z https://community.hpe.com/t5/m-and-msm-series/convert-controlled-ap-to-autonomous/m-p/6716884#M4217 <P>Hello,</P><P>&nbsp;</P><P>I use MSM410 5.7.4.0&nbsp;Ap-s with&nbsp;MSM720 controller. controller is dead, so i need to convert AP-s to autonomous mode.</P><P>&nbsp;</P><P>please can you advice, what is easy way to do this. do i need to change firmware on each Ap?</P><P>&nbsp;</P><P>Thanks,</P><P>Giga</P> Fri, 06 Mar 2015 08:01:33 GMT https://community.hpe.com/t5/m-and-msm-series/convert-controlled-ap-to-autonomous/m-p/6716884#M4217 giga 2015-03-06T08:01:33Z https://community.hpe.com/t5/m-and-msm-series/convert-controlled-ap-to-autonomous/m-p/6717724#M4221 <P>The MSM720 controller has a lifetime warranty. Why not log a call and get it replaced?</P><P>&nbsp;</P><P>You can set an AP to autonomous mode from the controller (sounds like that is not an option here).</P><P>If you reset the AP, when it restarts, it will have a default IP address 192.168.something. When you log into that address, you can convert to autonomous mode. No special firmware needed!</P> Mon, 09 Mar 2015 10:13:10 GMT https://community.hpe.com/t5/m-and-msm-series/convert-controlled-ap-to-autonomous/m-p/6717724#M4221 Richard Litchfield 2015-03-09T10:13:10Z