https://community.hpe.com/t5/m-and-msm-series/management-vlan/m-p/6740555#M4308 <P>Hi,</P><P>&nbsp;</P><P>I have some HP 425 AP's managed by MSM720 in one group. All of them are connected to switch to ports with configured VLAN-s:</P><P>90 - untagged</P><P>50 - tagged (private wifi)</P><P>51 - tagged (public wifi)</P><P>&nbsp;</P><P>Some of AP's connects to controller using untagged VLAN and some other using tagged (50) VLAN.</P><P>&nbsp;</P><P>How can I force all AP's to use untagged VLAN to communicate with controller.</P><P>&nbsp;</P><P>Michal</P> Mon, 04 May 2015 11:40:50 GMT CirrusMS 2015-05-04T11:40:50Z https://community.hpe.com/t5/m-and-msm-series/management-vlan/m-p/6740555#M4308 <P>Hi,</P><P>&nbsp;</P><P>I have some HP 425 AP's managed by MSM720 in one group. All of them are connected to switch to ports with configured VLAN-s:</P><P>90 - untagged</P><P>50 - tagged (private wifi)</P><P>51 - tagged (public wifi)</P><P>&nbsp;</P><P>Some of AP's connects to controller using untagged VLAN and some other using tagged (50) VLAN.</P><P>&nbsp;</P><P>How can I force all AP's to use untagged VLAN to communicate with controller.</P><P>&nbsp;</P><P>Michal</P> Mon, 04 May 2015 11:40:50 GMT https://community.hpe.com/t5/m-and-msm-series/management-vlan/m-p/6740555#M4308 CirrusMS 2015-05-04T11:40:50Z https://community.hpe.com/t5/m-and-msm-series/management-vlan/m-p/6741542#M4315 <P>On the switch ports for the APs we set the default VLAN to the "Guest Network", But allowed Both VLANs ("Guest" and Private). And used the "Egress network" option under the "VSC binding" &nbsp;to allow the "Private" users access to the "Private" Network.</P> Wed, 06 May 2015 13:54:17 GMT https://community.hpe.com/t5/m-and-msm-series/management-vlan/m-p/6741542#M4315 Chris_Franklin 2015-05-06T13:54:17Z