how to decode syslog message from MSM760 controller

Olivier RIEBEN — Fri, 05 Jun 2015 14:38:35 GMT

In the syslog message like:

"06-05-2015 16:35:20 Local1.Info 10.9.2.1 eventmgr: EVENT[1837805] Client (mac='A8:A5:A0:96:7E:1E') successfully authorized using WPA2 on interface (value='r1v1')"

how to interpret the value "r1v1" to find on which access point the client was connected ?

Is this possible using an SNMP request ?

Olivier

Re: how to decode syslog message from MSM760 controller

Arimo — Mon, 22 Jun 2015 11:58:13 GMT

This message just tells you that a client connected to 5GHz radio on VAP 1 (if I remember v1 right). You can see which AP the client is in on the controller, but I can't from the top of my head remember how to see it via SNMP. Or if you can.

topic how to decode syslog message from MSM760 controller in M and MSM Series

how to decode syslog message from MSM760 controller

Re: how to decode syslog message from MSM760 controller