https://community.hpe.com/t5/m-and-msm-series/hp-msm-760-vlans-tagging-dhcp/m-p/6810307#M4558 <P>Can you share screenshot of VSC configuration?</P><P>&nbsp;</P><P>Thanks,</P><P>Ratchapas</P> Wed, 11 Nov 2015 05:56:15 GMT Ratchapas 2015-11-11T05:56:15Z https://community.hpe.com/t5/m-and-msm-series/hp-msm-760-vlans-tagging-dhcp/m-p/6810036#M4556 <P>Hello everyone,</P><P>&nbsp;</P><P>i am in need of help.</P><P>We have a 760 controller, connected on its internetport to a DSL router ( for non company internetaccess) on VLAN 666. The internetport is getting a dhcp address.</P><P>The LAN port is connected to our wired network, taht port is tagged with VLAN 50 and VLAN 60. The Access Points are connected to our switches on tagged ports ( VLANS 666/60/50 ).&nbsp;</P><P>As soon as we configure a distributed VSC, trying to let traffic pass thru a certain VLAN, just this 1 VSC works, another VSC passing traffic to VLAN 666 for example, will just stop routing th traffic right.</P><P>&nbsp;</P><P>any ideas?</P> Tue, 10 Nov 2015 09:46:45 GMT https://community.hpe.com/t5/m-and-msm-series/hp-msm-760-vlans-tagging-dhcp/m-p/6810036#M4556 Mangan 2015-11-10T09:46:45Z https://community.hpe.com/t5/m-and-msm-series/hp-msm-760-vlans-tagging-dhcp/m-p/6810307#M4558 <P>Can you share screenshot of VSC configuration?</P><P>&nbsp;</P><P>Thanks,</P><P>Ratchapas</P> Wed, 11 Nov 2015 05:56:15 GMT https://community.hpe.com/t5/m-and-msm-series/hp-msm-760-vlans-tagging-dhcp/m-p/6810307#M4558 Ratchapas 2015-11-11T05:56:15Z