https://community.hpe.com/t5/m-and-msm-series/gms-with-two-controllers/m-p/6827899#M4665 <P>I have a situation where i am running the Guest Management System with one MSM765zl controller for the last few years. Now i am adding a new MSM720 controller in the deployment. I want to be able to use the same GMS database to update both controllers with the same guest accounts. Is this even possible?</P> Fri, 29 Jan 2016 17:57:52 GMT Andreas Papamihael 2016-01-29T17:57:52Z https://community.hpe.com/t5/m-and-msm-series/gms-with-two-controllers/m-p/6827899#M4665 <P>I have a situation where i am running the Guest Management System with one MSM765zl controller for the last few years. Now i am adding a new MSM720 controller in the deployment. I want to be able to use the same GMS database to update both controllers with the same guest accounts. Is this even possible?</P> Fri, 29 Jan 2016 17:57:52 GMT https://community.hpe.com/t5/m-and-msm-series/gms-with-two-controllers/m-p/6827899#M4665 Andreas Papamihael 2016-01-29T17:57:52Z https://community.hpe.com/t5/m-and-msm-series/gms-with-two-controllers/m-p/6834745#M4701 <P>No.</P><P>It may make sense for one of the controllers to just do guest (not manage any APs). You egress to a VLAN, and have guest access ingress to the guest controller via VLAN rather than SSID. Check the max concurrent users supported (think it is 250 for the MSM720 and 2000 for the MSM765/775.</P> Sat, 20 Feb 2016 23:11:15 GMT https://community.hpe.com/t5/m-and-msm-series/gms-with-two-controllers/m-p/6834745#M4701 Richard Litchfield 2016-02-20T23:11:15Z