topic MSM 760: Adding Building floorplan to the controller in M and MSM Series

MSM 760: Adding Building floorplan to the controller

MichaelRicardo — Tue, 08 Mar 2016 11:55:08 GMT

Hello,

Is there a feature on MSM 760 to add Building floorplan to the controller and mark AP to the map?

I am looking at all menus and could not find one.

Regards,

Michael

Re: MSM 760: Adding Building floorplan to the controller

Michael Hess — Tue, 08 Mar 2016 14:20:43 GMT

Hi,

there is'nt such option on the controller. The only way I know, is to use iMC-Software from HP. There you can import floorplans an position the access-points.

Re: MSM 760: Adding Building floorplan to the controller

CraigS1971 — Tue, 15 Mar 2016 08:23:53 GMT

Hi Michael,

I use this: http://www.ekahau.com/wifidesign/ekahau-site-survey

It works very well. Import autocad plans, set scale, add walls and then plan your environment or simply drop your AP type to have a visual representation of the signal. Quite accurate.

Regards,

Craig.