unable to do controller Teaming

tejene_bhandari — Wed, 22 Jun 2016 18:19:14 GMT

hi everyone

here is the real challenge i'm facing, im unable to make team 2 controller.

i have spend 4 days doing so in the end no luck. i have follow all the user manual still no luck.

can you please guide me step by step how can i make 2 controller team.

here what i have configure so far.

controller LAN ip address and on both Controller, Controller can ping each other.

each Controller has same Clock time zone, time

if possible can you please do teamviewer 2mro GMT +3:00 10 oclock.

my email id andrewbhandari@gmail.com

skype andrew_bhandari1

thanks

Tej

Re: unable to do controller Teaming

Walter001 — Wed, 22 Jun 2016 19:07:07 GMT

Controllers LAN ports are in the same subnet? No routing/firewalling between devices?

Master - 192.168.0.1 , Slave 192.168.0.2

Slave: Management/Teaming: enable "Controller Teaming", choose LAN-Port in "control Channel"

Master: management/Teaming: enable "Controller Teaming", choose LAN-Port in control Channel", enable "Team-manager", fill in "team-name", IP-address 192.168.0.3, fill in correct subnet-mask, choose LAN for "interface"

Thats it!

topic unable to do controller Teaming in M and MSM Series

unable to do controller Teaming

Re: unable to do controller Teaming