Multiple MSM430 without controller

BillyCorgan0416 — Thu, 17 Nov 2016 12:16:13 GMT

GOod day to all!

Can someone help me on this.

I am using 8 E-MSM430 without controller..

I can't seem to find the IP range for the AP.. i am plannig to set specific range for each AP. because i am afraid that it would cause a traffic or ip conflict if dont set a specific ip range.

I set each AP to VLAN 50.. 192.168.50.3, 192.168.50.4, 192.168.50.5, 192.168.50.6, 192.168.50.7, 192.168.50.8, 192.168.50.9, 192.168.50.10.

would this be possible? i spent a week scratching my head because AP doesnt give me access to internet..or maybe because i forgot or there's something wrong in my configuration..

Can someone help please.

Thank you so much!

Re: Multiple MSM430 without controller

dnat — Thu, 07 Dec 2017 13:44:43 GMT

Are the APs fully configured (SSID, DHCP ranges or a DHCP relay) and users can connect to the APs? If so: Internet is ususally accessible through a security gateway such as a firewall. Are your AP's and WLAN user ranges whitelisted?

A high level diagram and some configuration output may be helpful here,

topic Multiple MSM430 without controller in M and MSM Series

Multiple MSM430 without controller

Re: Multiple MSM430 without controller