https://community.hpe.com/t5/m-and-msm-series/can-t-reset-to-defaults-3c16491/m-p/2315110#M5221 I have a problem with reseting to factory defaults. I pressed reset for more than 10 seconds during powering up the switch. I have connected to switch by patchord on port no 1. After reset when I run dicovery application it is findig the switch but when I try to ping those IP or log in to it, it doesn't work.<BR /><BR />There is probablity that VLAN 1 whas deleted from the switch - maybe this is the problem?<BR /><BR />Is there any other way to reset the switch?<BR /><BR />Please help<BR /><BR /> Sat, 03 Oct 2009 22:34:55 GMT tfajga 2009-10-03T22:34:55Z https://community.hpe.com/t5/m-and-msm-series/can-t-reset-to-defaults-3c16491/m-p/2315110#M5221 I have a problem with reseting to factory defaults. I pressed reset for more than 10 seconds during powering up the switch. I have connected to switch by patchord on port no 1. After reset when I run dicovery application it is findig the switch but when I try to ping those IP or log in to it, it doesn't work.<BR /><BR />There is probablity that VLAN 1 whas deleted from the switch - maybe this is the problem?<BR /><BR />Is there any other way to reset the switch?<BR /><BR />Please help<BR /><BR /> Sat, 03 Oct 2009 22:34:55 GMT https://community.hpe.com/t5/m-and-msm-series/can-t-reset-to-defaults-3c16491/m-p/2315110#M5221 tfajga 2009-10-03T22:34:55Z