topic Re: RT2860AP in M and MSM Series

RT2860AP

hdus — Sun, 22 Nov 2009 20:51:24 GMT

I'm working with a 3Com Cable/DSL 11n Firewall router 3CRWER300-73 with the newest firmware 1.11.01. When I activate the Wireless Mode of the router the system is broadcasted as RT2860AP without any security totally open. I believe that all security settings are made correct. The defined SID is not broadcasted. What's the reason for this mistery?? I never defined an open secureless SID RT2860AP but this ist the only one which I can detect as SID broadcaster.

I'll appreciate any help.

--hdus

This message was edited by hdus on 11-22-09 @ 12:56 PM

Re: RT2860AP

hdus — Sun, 22 Nov 2009 20:51:24 GMT

I'll appreciate any help.

--hdus

This message was edited by hdus on 11-22-09 @ 12:56 PM

Re: RT2860AP

Qwerty_1 — Sun, 17 Jan 2010 18:11:47 GMT

ndus

I have same problem :(

if I turn off wifi by button, then turn off and on router, and then on wifi by button I get unsecured AP with SID RT2860AP.

Firmware 1.11.01

2 Techno

1) yes, this is 'my' SID

2) yes

3) same results even if I does not change any settings.

Re: RT2860AP

Qwerty_1 — Tue, 19 Jan 2010 21:31:00 GMT

No one with same problem?....

Re: RT2860AP

Qwerty_1 — Fri, 22 Jan 2010 20:25:02 GMT

looks like I should return device to seller :(

This message was edited by Qwerty on 1-22-10 @ 1:05 PM

Re: RT2860AP

Techno — Tue, 23 Feb 2010 12:11:46 GMT

Querty

You really need to log a support case for this !!

If you are out of support, contact

Customer Advocacy Team (CAT) on "GSO_EMEA_CAT@3com.com " and log a complaint with them.

Good luck

The Tech Man Has Spoken....

Re: RT2860AP

Qwerty_1 — Tue, 23 Feb 2010 23:24:49 GMT

They are reject my request (unauthorized seller)

Re: RT2860AP

Techno — Fri, 26 Feb 2010 12:04:28 GMT

Have you tried registering your Router on Esupport ? http://emea.3com.com/support/esupport.html

They do not check reseller there, and if your router has not been registerd yet, you may be able to get Phone Support too for 90 days...

Hope this helps

The Tech Man Has Spoken....

Re: RT2860AP

Qwerty_1 — Sat, 27 Feb 2010 08:34:10 GMT

Yes, I have. Same problem...

Re: RT2860AP

nevets_1 — Tue, 02 Mar 2010 12:32:33 GMT

I have the ADSL wireless router 11n firewall. Ethernet connects OK , but the wireless when an encryption is applied it will not work , and comes up with certificate not found . When the encryption is off works fine but have open access. I have tried several encryption's all the same . Thank you for any help.

Re: RT2860AP

hyperlisk — Tue, 10 Aug 2010 11:34:31 GMT

I had the same problem and found a fix. Go to Wireless settings and set Wireless mode to 802.11g only. Apply settings. Now go back to Wireless settings and switch back to Mixed 802.11n, 802.11g... mode and apply. It should work now!

This message was edited by hyperlisk on 8-10-10 @ 4:35 AM