topic Re: Password Reset on V-M200 Access Point in M and MSM Series

Password Reset on V-M200 Access Point

BogoFinland — Tue, 04 Jan 2011 20:06:21 GMT

I have reset my wireless router and now I am trying to establish a new password. I tried to connect my computer directly to the router via Ethernet and then entered http://192.168.1.1 in my web browser. It does not bring me to the management tool. What am I doing wrong?

Help! This seems like it should be very simple.

Bruce

Re: Password Reset on V-M200 Access Point

tschaps — Wed, 05 Jan 2011 05:04:19 GMT

it's a secure connection, add the 's' - https://192.168.1.1

Re: Password Reset on V-M200 Access Point

BogoFinland — Wed, 05 Jan 2011 08:06:49 GMT

I have tried that and still cannot connect to the management tool.

Could I be using the wrong type of Ethernet cable to connect my computer to the V-M200? Crossover versus straight thru. Does that matter any more?

Re: Password Reset on V-M200 Access Point

BogoFinland — Wed, 05 Jan 2011 13:40:50 GMT

I just figured out my problem. My IP address on my computer needed to be changed within the range of 192.168.1.2 through 192.168.1.254 and it now allows me to access the management tool.

Re: Password Reset on V-M200 Access Point

tschaps — Wed, 05 Jan 2011 17:11:36 GMT

@BogoFinland wrote:
I just figured out my problem. My IP address on my computer needed to be changed within the range of 192.168.1.2 through 192.168.1.254 and it now allows me to access the management tool.

That's what I started out writing to suggest, then I decided to look at the manual again (just deployed 10 of these) and the ethernet port is supposed to be giving out IP addresses on that subnet by default, so you should not have had to do that. But, whatever worked.