https://community.hpe.com/t5/m-and-msm-series/msm760-configure-dhcp/m-p/6994916#M5938 <P>My scenario...</P><P>Currently have teamed 760's with multiple VSC's.&nbsp; All VSC's use an external DHCP using relay and Radius config.</P><P>need to...</P><P>Keep all Prod VSC's on the existing external DHCP via Relay</P><P>and Move just our Guest VSC to internal MSM DHCP Client</P><P>Thoughts?!&nbsp;</P><P>Thanks in advance, JC</P> Fri, 26 Jan 2018 13:29:19 GMT jrc159357 2018-01-26T13:29:19Z https://community.hpe.com/t5/m-and-msm-series/msm760-configure-dhcp/m-p/6994916#M5938 <P>My scenario...</P><P>Currently have teamed 760's with multiple VSC's.&nbsp; All VSC's use an external DHCP using relay and Radius config.</P><P>need to...</P><P>Keep all Prod VSC's on the existing external DHCP via Relay</P><P>and Move just our Guest VSC to internal MSM DHCP Client</P><P>Thoughts?!&nbsp;</P><P>Thanks in advance, JC</P> Fri, 26 Jan 2018 13:29:19 GMT https://community.hpe.com/t5/m-and-msm-series/msm760-configure-dhcp/m-p/6994916#M5938 jrc159357 2018-01-26T13:29:19Z https://community.hpe.com/t5/m-and-msm-series/msm760-configure-dhcp/m-p/6995177#M5940 <P>Keep all your Prod VSCs using authentication only to allow traffic from the APs to the VLANs on the connected switches which can get to the DHCP servers.</P><P>Add access control to the Guest VSC to tunnel the traffic back to the controller where its DHCP server will respond. Egress the traffic out to your guest VLAN on a controller port.</P> Mon, 29 Jan 2018 20:14:45 GMT https://community.hpe.com/t5/m-and-msm-series/msm760-configure-dhcp/m-p/6995177#M5940 NeilR 2018-01-29T20:14:45Z