topic Re: MSM460 factory reset not working in M and MSM Series

MSM460 factory reset not working

jhooverpfcu — Fri, 11 Jan 2019 12:46:24 GMT

I have a few MSM460 I am trying to factory reset but when following the manual for the product the status/power LED never flashes three time.

All lights flash slowly about 6 times then all lights flash rapidly around 16 times. Then the AP goes to have a solid power light and radio 2 blinks rapidly and radio 1 blinks slowly.

Any ideas what is going on with these APs?

Re: MSM460 factory reset not working

CraigS1971 — Mon, 14 Jan 2019 13:50:59 GMT

Hi,

Press and hold the reset button, and release after 3x flashes.

The next mode is for something else.

You will sometime have to do it more than once - I have had to do the reset 6x time to actually get it to factory defaults ie clear.

Re: MSM460 factory reset not working

jhooverpfcu — Mon, 14 Jan 2019 17:18:13 GMT

Good to know. I will give that a try later today.

Thanks

Re: MSM460 factory reset not working

NathanD212 — Tue, 23 Feb 2021 01:18:09 GMT

i have tried multiple times to factory a used msm460 i recently was given.

at boot all that happens is that the power light stays on, the ethernet light is off, and the radio 1 and radio 2 lights blink quickly without pattern that i could find.

after trying to factory reset it myself and waiting for the 3 slwoer blinks to happen it still does this.

https://youtu.be/DEA9hlcb4fg

any ideas what is wrong with it?