topic controller teaming with vlan-range configuration in M and MSM Series

controller teaming with vlan-range configuration

temuri426 — Sun, 11 Mar 2012 16:38:25 GMT

hello

I have configured teaming with two MSM760. have two VSC's one of which have vlan-range option enabled and second VSC is with one vlan.

with single vlan VSC i didn't have any problem, but i have connectivity problem with second VSC(with vlan-range). clients are getting ip addresses, but they couldn't reach even their gateways. also at this time team ip and primary wlc is not accessible.

I have also opened support case, HP engineer told me that teaming and vlan range usage together is not supported.

Our task is to have redundancy - teaming and no huge broadcast domains, because i use several vlans.

If someone has the same task, please give me any HP supported solution....

Re: controller teaming with vlan-range configuration

temuri426 — Wed, 14 Mar 2012 08:08:20 GMT

Hello again,

did anybody here used teaming , one sssid and vlan range-ranges together?

i dont believe that if i will team 5 controllers i have to use only one huge subnet for users... HP guys help :)

Re: controller teaming with vlan-range configuration

dverl — Tue, 20 Mar 2012 22:13:37 GMT

From what I understand you have to set a users 'home network/vlan' by passing the correct RADIUS attribute for the desired VLAN.

Re: controller teaming with vlan-range configuration

temuri426 — Wed, 21 Mar 2012 14:31:46 GMT

hello dverl,

i'm not using radius server for vlan assignment, just created network profiles with vlan ranges.

i am interested if anyone uses such configuration, or how well does it works?

thanks