topic HORCM in XP Storage

HORCM

gunasekaran.j — Thu, 09 Jul 2009 09:42:52 GMT

hi all

Could you please explain how check the pairstatus in Windows2004 for XP Arrays.

Thanks
Guna Sekaran

Re: HORCM

IBaltay — Thu, 09 Jul 2009 10:23:04 GMT

Hi,
it could be done via the pairdisplay command
- page 132:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01634012/c01634012.pdf?jumpid=reg_R1002_USEN

Re: HORCM

gunasekaran.j — Thu, 09 Jul 2009 11:29:15 GMT

thanks for the information.

when i am trying the below command

pairdisplay - d qqlen

it shows the below error

14:26:25-23280-05232- [pairdisplay][exit(251)]
[EX_ATTHOR] Can't be attached to HORC manager
[Cause ]:Couldn't connect with the HORC manager.
[Action]:Please check if HORC manager is running or if HORCMINST is set correctly.

Re: HORCM

IBaltay — Thu, 09 Jul 2009 12:39:58 GMT

Raid Manager (RM) configuration process is described in the manual above: RM instance must run and the HORCM config files should be configured/edited before the RM could be used.