system management
1753797 メンバー
7320 オンライン
108805 解決策
新規ポスト

igniteリカバリ時のエラーについて

 
somasa
新しいメンバー

igniteリカバリ時のエラーについて

こんにちは。

初めて質問させて頂きます。

make_tape_recovery -AvにてバックアップしたTapeからリストアをしようとしたら以下のメッセージ�が出力され、その後、itool上で各設定をしてリストアを開始するとさらに下記メッセージ�が出力されそこで止まってしまいます。



* Checking configuration for consistency...

ERROR: "/var/opt/ignite/CONFIG", line 210: Illegal character: "i"

ERROR: "/var/opt/ignite/CONFIG", line 210: syntax error

ERROR: Problems were encountered while parsing config file:

"/var/opt/ignite/CONFIG".

ERROR: net_cfg_prep: Problems were encountered while parsing the

configuration files. See the messages above for details. Using

instl_adm with the -T and/or -D options on the server may help isolate

the problem. (See instl_adm(1M) and instl_adm(4) man pages.)



* Loading configuration utility...

* Beginning installation from source: /dev/rmt/0m

======= 04/18/07 07:11:04 EDT Starting system configuration...

/usr/lib/hpux32/dld.so: Unable to find library '/usr/lib/libsmapi.so.2'.

/usr/lib/hpux32/dld.so: Unsatisfied data symbol 'testmode_flag' in load module '/sbin/configure1'.

/usr/lib/hpux32/dld.so: Unsatisfied data symbol 'debug_flag' in load module '/sbin/configure1'.

/usr/lib/hpux32/dld.so: Unsatisfied data symbol '__SB_masks' in load module '/sbin/configure1'.

/usr/lib/hpux32/dld.so: Unsatisfied data symbol 'session_is_drd' in load module '/sbin/configure1'.

/usr/lib/hpux32/dld.so: Unsatisfied code symbol '__cxa_personality_routine' in load module '/sbin/configure1'.

(同様のメッセージが大量に出力されているため中略)

/usr/lib/hpux32/dld.so: Unsatisfied data symbol '_ZTVN10__cxxabiv117__class_type_infoE' in load module '/sbin/configure1'.

/usr/lib/hpux32/dld.so: Unsatisfied data symbol '_ZTVN10__cxxabiv117__class_type_infoE' in load module '/sbin/configure1'.

/usr/lib/hpux32/dld.so: Unsatisfied data symbol '_ZTVN10__cxxabiv117__class_type_infoE' in load module '/sbin/configure1'.

どなたか、この現象についての原因及び対応法などわかりましたら教えていただけないでしょうか?

以上、よろしくお願い致します。
1件の返信1
somasa
新しいメンバー

igniteリカバリ時のエラーについて

自己レスです。

どうやら、Igniteのバージョンが異なっていたのが原因でした。

ありがとうございました。