取消
顯示結果 
搜尋替代 
您的意思是: 

ESL712e SNMP 設定問題

ESL712e SNMP 設定問題

請問 ESL 712e command view TL 中有一個 SNMP Trap Destination 是什麼意思, 該怎麼設定?



Thanks



Eric
7 回覆

ESL712e SNMP 設定問題

 

ESL712e SNMP 設定問題

you can integrate the SNMP trap to the OVO or HP Insight Manager CMS for monitor the backup status.

ESL712e SNMP 設定問題

Hello Eric,



SNMP Trap Destination :

It set the IP address of manage station. Once Tape library got either critical or warning events, it will sent the event to manage station. It is same SNMP behaviour as network device. manage station could be Openview, Insight manager and others that receive trap and display the event. Manage station need ESL712e MIB file and to compile to understand the events from ESL712e.



Without Snmp setting, tape event messages may display in its OCP, event log from OCP Menu or Command view TL.





ESL712e SNMP 設定問題

Dear Matthew,



How to config HP Insight Manager CMS?



Thanks



Eric

ESL712e SNMP 設定問題

For getting insight manager CMS software, go following.



http://h18000.www1.hp.com/products/servers/management/hpsim/download.html



For config insight manager CMS, check the bottom of page.



http://h18000.www1.hp.com/products/servers/management/hpsim/techsupport.html#install

ESL712e SNMP 設定問題

Now, we have a HP insight manager CMS. Not only the trap destination needs to setup but also "Community String". I don't understand it. How to define it?



Thanks



Eric

ESL712e SNMP 設定問題

一般是設成 public,就如同在安裝MRTG過程會碰到的snmp community string是一樣的.