下了許多patch後，已經搞不清到底問題在哪裡了....

[watermelonyu]

接一台已經很久沒有patch過的HP-UX 11.11，我用 http://www1.itrc.hp.com/service/patch/searchBySystem.do?BC=main| 這個地方，去search所有應該patch的東西，把所有critical的通通勾起來，一次下載然後全部patch上去。

但是，patch過後，開機的時候就出現了error (/etc/rc.log)如下:



Enable auxiliary swap space

Output from "/sbin/rc1.d/S500swap_start start":

----------------------------

Enabling device paging on /dev/vg00/lvol10.

Enabling device paging on /dev/vg00/lvol2.

/usr/sbin/swapon: /dev/vg00/lvol2 is already enabled for paging.

Enabling device paging on /dev/vg00/lvol11.

Warning: swapon returned exit code: 1

"/sbin/rc1.d/S500swap_start start" FAILED



Configure HP Gigabit Ethernet interfaces

Output from "/sbin/rc2.d/S308hpgelan start":

----------------------------

ERROR: (PPA: 3) : Device lan3 is not a gelan device. It is a igelan device.

"/sbin/rc2.d/S308hpgelan start" FAILED



===========================================================

我看了/etc/rc.config.d/hpgelanconf :

HP_GELAN_INIT_ARGS="HP_GELAN_STATION_ADDRESS HP_GELAN_SPEED HP_GELAN_MTU HP_GELAN_FLOW_CONTROL HP_GELAN_AUTONEG HP_GELAN_SEND_

COAL_TICKS HP_GELAN_RECV_COAL_TICKS HP_GELAN_SEND_MAX_BUFS HP_GELAN_RECV_MAX_BUFS"



HP_GELAN_INTERFACE_NAME=lan3

HP_GELAN_STATION_ADDRESS=

HP_GELAN_SPEED=

HP_GELAN_MTU=

HP_GELAN_FLOW_CONTROL=

HP_GELAN_AUTONEG=0

HP_GELAN_SEND_COAL_TICKS=

HP_GELAN_RECV_COAL_TICKS=

HP_GELAN_SEND_MAX_BUFS=

HP_GELAN_RECV_MAX_BUFS=



/etc/rc.config.d/hpigelanconf也有對lan3做設定，設定的比較完全，看起來hpgelanconf似乎是誤config的，但是這個要怎麼把它拿掉呢？直接修改/etc/rc.config.d/hpgelanconf，把lan3拿掉可以嗎？



另外swap_start也很怪，patch之前是可以SUCCESS通過的，為什麼現在反而會有這種奇怪的FAIL呢？



因為一次patch了太多東西，我已經完全搞不清到底要去找哪份patch文件了，有沒有哪位前輩高人能稍微指點一下，這種狀況到底要怎麼處理才好？感激不盡~~~ >_<