CDE Startup Troubleshooting

[watermelonyu]

CDE Startup Troubleshooting

DocId: XMKKBAN00000234 Updated: 20040325



DOCUMENT

CDE Startup Troubleshooting

Problem Description

Problems during Startup of CDE. The aim of this document is getting a CDE-login-mask.

Problems of the user-specific CDE Login are discussed in another document ("CDE: Login Problems").



Symptoms

CDE Login-Mask does not appear; CDE startup failed; iterated trials to start CDE are failing



Step 3 提到以下



Edit the file /etc/inittab:

/usr/bin/vi /etc/inittab

Therefore you need to check the following lines and if necessary you need to change them:



init:3:initdefault:

Default-Runlevel is 3; CDE is started in runlevel 3 normally.



#xd:3:respawn:/opt/hpxt/enware/xdm -nodaemon \

-config /opt/hpxt/enware/xdm/xdm-config

If possibly a line for starting xdm exists, comment it out (# at the beginning of the line)



vue :4:respawn:/usr/vue/bin/vuerc # VUE invocation

If perhaps a line for VUE exists, it is possible to suppress the starting of VUE-processes in runlevel 3 by the entry above.

===============

但是我看過可以正常用 W-window 連進去的 HP-Ux 11.11, /etc/inittab 也沒有這幾行, why?

[watermelonyu]

打錯字, 更正一下...但是我看過可以正常用 X-window 連進去的 HP-Ux 11.11, /etc/inittab 也沒有這幾行, why?

[watermelonyu]

因為 VUE 現在已經不用囉, 全部都改成 CDE (也就是 run level 3) 的環境了, 在早期 10.20 的版本是還有, 你可以看一下 /etc/inittab 中就會有提到

[watermelonyu]

當然, 前提是你還有 10.20 版本的 HP-UX 系統

[watermelonyu]

for HP-UX 11 以上的版本, 有沒有類似 CDE Startup Troubleshooting 這樣的參考文件?

[watermelonyu]

以下這篇如何, 看看有沒有幫助囉



http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=zh_TW&docId=200000072770803