make_tape_recovery 备份报错，麻烦大家帮我看看是什么原因？

[windzha]

[XA-BAK:/#]make_tape_recovery -v -A
     WARNING: /dev/disk/disk3_p2 is not a LIF volume.
         No LIF files on the boot disk will be archived.
         Check /stand/bootconf, man bootconf(4), and /dev/dsk to
         ensure that the bootconf file is set up correctly.
WARNING: The make_sys_image failed to save the LIF volume.
       * Scanning system for IO devices...
       * Boot device is: 0/0/0/2/0.0x6.0x0
       * Creating System Configuration.
 * /opt/ignite/bin/save_config -f
         /var/opt/ignite/recovery/2012-04-16,15:02/system_cfg vg00
       * Backing Up Volume Group /dev/vg00
       * /usr/sbin/vgcfgbackup /dev/vg00
       * Creating Map Files for Volume Group /dev/vg00
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

       * Backing Up Volume Group /dev/vghy
       * /usr/sbin/vgcfgbackup /dev/vghy
       * Creating Map Files for Volume Group /dev/vghy
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vghy.mapfile /dev/vghy

       * Backing Up Volume Group /dev/vgdata
       * /usr/sbin/vgcfgbackup /dev/vgdata
       * Creating Map Files for Volume Group /dev/vgdata
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgdata.mapfile /dev/vgdata

       * Backing Up Volume Group /dev/vglock
       * /usr/sbin/vgcfgbackup /dev/vglock
       * Creating Map Files for Volume Group /dev/vglock
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vglock.mapfile /dev/vglock

       * Backing Up Volume Group /dev/vgky
       * /usr/sbin/vgcfgbackup /dev/vgky
       * Creating Map Files for Volume Group /dev/vgky
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgky.mapfile /dev/vgky

       * Creating Control Configuration.
       * Creating Archive File List
       * Creating Archive Configuration
* /opt/ignite/lbin/make_arch_config -c
         /var/opt/ignite/recovery/2012-04-16,15:02/archive_cfg -g
         /var/opt/ignite/recovery/2012-04-16,15:02/flist -n 2012-04-16,15:02 -r
         ipf -b 64 -d Recovery\ Archive -t 22 -i 1 -m t
       * Saving the information about archive to
         /var/opt/ignite/recovery/previews
       * Creating The Tape Archive
       * Checking configuration file for Syntax
WARNING: You are about to create an Itanium-based recovery tape.  If this
         system does NOT support direct tape boot, you will need to perform
         "two-step media recovery" where the boot media (CD or DVD) has the
         same version of Ignite-UX as the version on this tape.
       * Complete writing boot LIF onto tape.
       * /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s
         local -n 2012-04-16,15:02 -m t -w
         /var/opt/ignite/recovery/2012-04-16,15:02/recovery.log -u -R -g
         /var/opt/ignite/recovery/2012-04-16,15:02/flist -a 9634700

       * Preparing to create a system archive.
lifls(open): No such file or directory
lifls: Can't list /dev/disk/disk3_p2; file not opened
WARNING: /dev/disk/disk3_p2 is not a LIF volume.
         No LIF files on the boot disk will be archived.
         Check /stand/bootconf, man bootconf(4), and /dev/dsk to
         ensure that the bootconf file is set up correctly.

       * Archiving contents of XA-BAK via tar image to local device /dev/rmt/0mn.
       * Creation of system archive complete.
NOTE:    The following files are in the list of files that were on the
         system, but they are no longer present.  These files are not
         included in the backup:
         /var/tmp/ign_configure/make_sys_image.log

       * Archive created and rewind the tape to beginning of tape.

NOTE: Could not read the /etc/resolv.conf file.
       * Cleaning up old configuration file directories

=======  04/16/12 15:33:06 EAT  make_tape_recovery completed with warnings