3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

3PAR 7200 Setup Issue

SHAMRIN
Advisor

3PAR 7200 Setup Issue

Hi!

I'm trying to setup our new 3PAR 7200 system (12x900GB) and have successfully created and configured the VSP.

Array was detected.

But next, on an error: Storage system initialization error.  The following disks are NOT in an acceptable state - all disks.

Status of each disk - degraded, detailed_state - invalid_connection.

What is this error? What can be done?

Thanks

Alex

1 REPLY
giladzzz
Honored Contributor

Re: 3PAR 7200 Setup Issue

Hi

first check all hardware is well seated and in place.

best way to do system initialization is to connect via serial console login as console and run OOTB (option1)

if you get an error  run option 6 ( setup the system to wipe and rerun OOTB). and then run OOTB again if you still get an error. open a call with HP.

Regards