3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

3PAR 7400 cli setup

 
ryabovdv
Occasional Visitor

3PAR 7400 cli setup

Hello,
need help please.

Unfortunatelly we don't have a possibility to deploy a GUI management software so we try to use cli.

Main question is how to allocate physical disk space to free space?
I tried servicemag, admithw,admitpd commands but freespace (#showspace) is equal 0

I try to read cli manual, but I'm newbie in storage and don't find any answers on this situation.
I will be glad if someone point me in right direction.
Best regards.

3PAR01 cli% showsys

    ---------------(MB)----------------
   ID -Name- ---Model---- -Serial- Nodes Master TotalCap AllocCap FreeCap FailedCap
35055 3PAR01 HP_3PAR 7400 0            2      0  3348480  1995776 1352704         0


3PAR01 cli% showspace
--Estimated(MB)---
RawFree UsableFree
      0          0
PAR01 cli% showpd
                           ---Size(MB)---- ----Ports----             
Id CagePos Type RPM State    Total    Free A      B      Capacity(GB)
 0 0:0:0   FC    15 normal  278528   81920 1:0:1* 0:0:1           300
 1 0:1:0   FC    15 normal  278528   80896 1:0:1  0:0:1*          300
 2 0:2:0   FC    15 normal  278528   89088 1:0:1* 0:0:1           300
 3 0:3:0   FC    15 normal  278528   89088 1:0:1  0:0:1*          300
 4 0:4:0   FC    15 normal  278528   87040 1:0:1* 0:0:1           300
 5 0:5:0   FC    15 normal  278528   86016 1:0:1  0:0:1*          300
 6 0:21:0  FC    10 normal  838656  418816 1:0:1* 0:0:1           900
 7 0:13:0  FC    10 normal  838656  419840 1:0:1  0:0:1*          900
---------------------------------------------------------------------
 8 total                   3348480 1352704     


3PAR01 cli% showld
Id Name          RAID -Detailed_State- Own SizeMB UsedMB Use Lgct LgId WThru MapV
 0 admin.usr.0      1 normal           0/1   5120   5120 V      0  ---     N    Y
 1 admin.usr.1      1 normal           1/0   5120   5120 V      0  ---     N    Y
 2 .srdata.usr.0    1 normal           0/1  40960  40960 V      0  ---     N    Y
 3 .srdata.usr.1    1 normal           1/0  40960  40960 V      0  ---     N    Y
 4 log0.0           1 normal           0/-  20480      0 log    0  ---     Y    N
 5 log1.0           1 normal           1/-  20480      0 log    0  ---     Y    N
 6 pdsld0.0         1 normal           0/1   1024      0 P,F    0  ---     Y    N
 7 pdsld0.1         1 normal           0/1   8192      0 P      0  ---     Y    N
 8 pdsld0.2         1 normal           1/0   8192      0 P      0  ---     Y    N
---------------------------------------------------------------------------------
 9                                         150528  92160 


3PAR01 cli% showcpg
                                       --------------(MB)--------------
               ----Volumes---- -Usage- -- Usr --- -- Snp --- -- Adm ---
Id Name  Warn% VVs TPVVs TDVVs Usr Snp Total Used Total Used Total Used
 0 FC_r1     -   0     0     0   0   0     0    0     0    0     0    0
 1 FC_r5     -   0     0     0   0   0     0    0     0    0     0    0
-----------------------------------------------------------------------
 2 total                         0   0     0    0     0    0     0    0
4 REPLIES 4
SNPP
Occasional Advisor

Re: 3PAR 7400 cli setup

Create virtual volume (VV) on CPG and export VV to your host(s).

ryabovdv
Occasional Visitor

Re: 3PAR 7400 cli setup

I can't create CPG therefore can't create VV and export on host.

Main question is how to add disk space to "allocted" space.
#showspace is showing 0

I think, i need any other numbers in #showspace results and then I will have possibility to create CPG

Dardan
Advisor

Re: 3PAR 7400 cli setup

If you've added disks recently, and you issued admitpd, it might take a while until all chunklets are initialized. The command showpd -c will show you the Free/Initialized chunklets. See example below:

3par cli% showpd -c
--------- Normal Chunklets --------- ---- Spare Chunklets -----
- Used -- --------- Unused --------- - Used - ---- Unused -----
Id CagePos Type State Total OK Fail Free Uninit Unavail Fail OK Fail Free Uninit Fail
0 0:0:0 SSD normal 3575 20 0 3305 0 0 0 0 0 250 0 0
1 0:1:0 SSD normal 3575 22 0 3303 0 0 0 0 0 250 0 0
2 0:2:0 SSD normal 3575 20 0 3305 0 0 0 0 0 250 0 0

Once the chunklets have been initialized, you will be able to create VVols and export them.

___________
Hit the Kudo's button to show appreciation or mark as solution if your question was answered.
ryabovdv
Occasional Visitor

Re: 3PAR 7400 cli setup

@Dardanthank you for reply,

i will try to monitor this.
I didn't know about it