3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

3PAR CLI setrcopygroup reverse -f -current -stopgroups -waittask fails

sushant_khandeb
Occasional Contributor

3PAR CLI setrcopygroup reverse -f -current -stopgroups -waittask fails

I am getting error while executing 3PAR CLI command "setrcopygroup reverse -f -current -stopgroups -waittask <rcg_name>". The  "showtask -d <taskid>"  shows failure in stopping RCG at target site.

3PAR01 cli% showtask -d 4737
Id Type Name Status Phase Step -------StartTime------- ------FinishTime------- -Priority- --User--
4737 remote_copy_reverse test-group failed --- --- 2018-04-12 10:25:57 IST 2018-04-12 10:26:15 IST n/a admin

Detailed status:
2018-04-12 10:25:57 IST Created task.
2018-04-12 10:25:57 IST Begin Reverse operation on group test-group started.
2018-04-12 10:26:06 IST Stopped Stopped remote copy of group test-group.
2018-04-12 10:26:15 IST Failed Failed to switch group test-group on target 3PAR01, target returned: Group(s) could not be stopped
.
3PAR01 cli%

This issue occurs intermitently but at high level it is impacting more critical things. 
Has anybody seen such issues ? Any information in this regard will help. 

Thanks,
Sushant

 

5 REPLIES
Dennis Handly
Acclaimed Contributor

Re: 3PAR CLI setrcopygroup reverse -f -current -stopgroups -waittask fails

Have you looked at the remote side for any errors why it can't be stopped?

What HPE 3PAR OS version are you using?

sushant_khandeb
Occasional Contributor

Re: 3PAR CLI setrcopygroup reverse -f -current -stopgroups -waittask fails

Hello Denis,

Thanks for your reply. The OS version of 3PAR array are as follows:

Source:
Release version 3.2.2 (MU1)
Patches: P08
Component Name Version
CLI Server 3.2.2 (MU1)
CLI Client 3.2.2
System Manager 3.2.2 (P08)
Kernel 3.2.2 (MU1)
TPD Kernel Code 3.2.2 (MU1)

 

Target:
Release version 3.2.2 (MU4)
Patches: P50,P51,P54
Component Name Version
CLI Server 3.2.2 (P51)
CLI Client 3.2.2
System Manager 3.2.2 (P54)
Kernel 3.2.2 (MU4)
TPD Kernel Code 3.2.2 (MU4)

What logs on 3PAR I can check at target side to look for any errors ? 
Are there any logs we can check ? 
If we get system to this repro stage again, what should be check for debugging such issues ?

Thanks,
Sushant

Dennis Handly
Acclaimed Contributor

Re: 3PAR CLI setrcopygroup reverse -f -current -stopgroups -waittask fails

> What logs on 3PAR I can check at target side to look for any errors?

 

You could use "showeventlog -d -oneline" with a time range: -startt "2018-04-12 10:25:00" -endt "2018-04-12 10:27:00"

sushant_khandeb
Occasional Contributor

Re: 3PAR CLI setrcopygroup reverse -f -current -stopgroups -waittask fails

Thanks Dennis, 

I am trying to get this issue repro again. I will collect the event information when I hit this issue.

Thanks,
Sushant

Dennis Handly
Acclaimed Contributor

Re: 3PAR CLI setrcopygroup reverse -f -current -stopgroups -waittask fails

> I will collect the event info when I hit this issue.

showeventlog can show old info.