cancel
Showing results for 
Search instead for 
Did you mean: 

3PAR Connectivity

 
SOLVED
Go to solution
Highlighted
Mzayed
Occasional Visitor

3PAR Connectivity

hi Dears, 

            i have Old 3par 7200 and i need to get new Box 3PAr 8200 can i connect Old 7200 direct to 8200 and mange Old Box from New 3PAR 8200 

4 REPLIES 4
Cali
Honored Contributor

Re: 3PAR Connectivity

7200 Drive Shelf on 8200?

No Way.


======================
That was not planned in this way.
Mzayed
Occasional Visitor

Re: 3PAR Connectivity

No
I need to connect old 3PAR 7200 as external volume or external storage on new box 3par8200

Re: 3PAR Connectivity

What are you wanting to do? If you have a 7200 and get a new 8200, then you will have two systems. The SSMC (StoreServ Management Console) software will connect to both systems letting you manage the 8200 and letting you continue to manage the 7200.

Do you want to move the volumes off the 7200 to the 8200? The 8200 should have a (temporary?) Peer Motion license which would let you move the volumes.


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

Torsten.
Acclaimed Contributor
Solution

Re: 3PAR Connectivity

You probably know this external storage possibility from XP arrays, but it is not possible for 3PAR.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!