3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

3PAR storeserv 8200 initialization and power up

 
Occasional Visitor

3PAR storeserv 8200 initialization and power up

Hi team

I need to know how to initialize the 3PAR storeserv 8200 storage 

i can't login to the 3PARsotreserv using the mfg RG-45 port 

I have 3PAR storeserv 8200 and 2 proliant DL380G9

BR

Ahmed

2 REPLIES 2
Highlighted
Valued Contributor

Re: 3PAR storeserv 8200 initialization and power up

Alright mate, 

You need to using right adapter (part number: 180-0055-01) and speed baund is 57600. 

If firmware level is lower than 3.2 you should be able to use public username and password, console/cmp43pd.

Id firmware level is higher than 3.2 you must contact HP cause password is encrypted.

Kind Regards

Slav

Highlighted
Acclaimed Contributor

Re: 3PAR storeserv 8200 initialization and power up

Why not follow the 3PAR Storeserv 8000 Storage Installation Guide, setup the (v)SP and initialize the array?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!