3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

3Par 7400 OOTB Procedure

 
Highlighted
NoahH
Occasional Contributor

3Par 7400 OOTB Procedure

Hi there

I want to do the Out of the box procedure on a 3Par 7400. After this was done I wasn't able to log in with 3paradm/3pardata anymore. Now I tried to resett the system again. On the second try the procedure stocks on the verify-step after I cointinued. ("Please verify your InForm OS versions are correct). Unfourtunately we do not have an active support contract of this system. Is there any way to solve this problem without HPE-Support?

Thanks a lot

 

1 REPLY 1
Highlighted
NoahH
Occasional Contributor

Re: 3Par 7400 OOTB Procedure

I found the error. The disks which I inserted to the array (8 disks) are in "invalid block size" state because they ran in another 3par with an other OS version before. When I use other drives with the right block size the OOTB works correctly. Is there any way to format the wrong disks with the write block size?