3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

3par + Hp Proliant 380

 
Highlighted
jsadmin
Visitor

3par + Hp Proliant 380

I've a 3par 7200 which was connected to fiberswitch and connected to 4 servers. I've replaced that 3par and today I Just want connect 3par 7200 directly to a HP Proliant 380. I've created that server on 3parGui and configured WWN from fiber card. 

Capture.PNG

 

 

 

 

 

 

 

 

 

Now I tried to export a disk and I got this message, Server has no active paths, template will be created but no active Vluns will be created. 

 

I would like to know what is missing, thank you. 

 

 

1 REPLY 1
Highlighted
Dardan
Frequent Advisor

Re: 3par + Hp Proliant 380

You could try to reset the FC ports where your server is connected to. I read you're also using other servers, make sure you also use the correct WWNs.
Using this PS command you can obtain the WWNs of a host:

Get-InitiatorPort | Select-Object -Property PortAddress | Format-List -Property PortAddress

 

___________
Hit the Kudo's button to show appreciation or mark as solution if your question was answered.