3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

7400 Add Physical disk problem

 
SOLVED
Go to solution
Deblu
Occasional Visitor

7400 Add Physical disk problem

Hi

I have a 3par 7400 storage and I have added 4 Physical disks to the enclosure, But the Allocated percentage is different from others.

The others is 61% new is 39%

Is that right or I have to type some command to balance the percentage?

Thanks!

4 REPLIES
yapkl
Trusted Contributor

Re: 7400 Add Physical disk problem

Did you do a tunesys after adding the drives?

Best Regards,

yapkl

Note: The opinions & comments above are my personal opinions, not of Hewlett Packard Enterprise
----------
If my post was useful, click on my KUDOS! thumb below! Thanks.
Deblu
Occasional Visitor

Re: 7400 Add Physical disk problem

Hi yapkl

Thanks for your reply.

Its been a longtime ,I cant remember. cloud you tell me the format of tunesys?

thanks

yapkl
Trusted Contributor
Solution

Re: 7400 Add Physical disk problem

Old info but I think still relevant - find it in SSMC.

https://d8tadude.com/2015/05/04/ssmc-2-1-whats-new/

Best Regards,

yapkl

Note: The opinions & comments above are my personal opinions, not of Hewlett Packard Enterprise
----------
If my post was useful, click on my KUDOS! thumb below! Thanks.
Dennis Handly
Acclaimed Contributor

Re: 7400 Add Physical disk problem

@Deblu

tunesys -h