cancel
Showing results for 
Search instead for 
Did you mean: 

Cli capabilities

 
Tedh256
Frequent Advisor

Cli capabilities

Quoting a customer a 3PAR solution to potentially replace an older Hitachi storage array.

 

This customer relies extensively on the hitachi cli -- they use batch/script commands to snap-clone LUNs that are attached to virtual machines as RDM data disks - then these cloned LUNs are presented (again I think with scripting) to test/dev virtual machines and used as data LUNS. Basically they keep 2 and somethimes 3 generations of servers up and running, and they use the above technique daily and weekly to keep test and dev in sync with production.

 

The question is: does the 3PAR cli offer this same kind of functionality?

 

 

1 REPLY
Sheldon Smith
Honored Contributor

Re: Cli capabilities

Yes, although the architecture design is different, so the end result may be a little different than with the Hitachi.

 

Take a look at the HP 3PAR Command Line Interface Administrator’s Manual, and at the HP 3PAR Command Line Interface Reference. (http://hp.com/support/manuals)


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!