HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Command for adding copy space to new created volume

 
SOLVED
Go to solution
LVSsanman
Occasional Advisor

Command for adding copy space to new created volume

createvv -tpvv -usr_aw 60 FC_r5 VV001 2G with snapshot space, need to know command for creating snapshot space from this command line.

 

Does anyome know how to add copy space while building a VV ?

 

The command above builds a Thinly Provisioned RAID5 2G volume, sets a warning of 60%, I'd like to add a copy VV on another CPG called NL_R6.

 

 

3 REPLIES
Solution

Re: Command for adding snap space to new created VV

By default, snap space uses the same CPG.  If you want it to go elsewhere, use the -snp_cpg option.

The setvv command with -snp_cpg can be used to change this.

LVSsanman
Occasional Advisor

Re: Command for adding snap space to new created VV

This worked, I was adding -snp_cpg to the create line, not the setvv line. worked great, Thanks!

Re: Command for adding snap space to new created VV

> I was adding -snp_cpg to the create line

 

This should work for the createvv line too:

createvv -tpvv -usr_aw 60 -snp_cpg NL_R6 FC_r5 VV001 2G