HPE 3PAR StoreServ Storage
1748167 Members
4154 Online
108758 Solutions
New Discussion

Re: Configure Windows Server 2012 MPIO with 3PAR

 
JuanCG
Super Advisor

Configure Windows Server 2012 MPIO with 3PAR

Hi all, I have an HP 3PAR with Inform version 3.1.1, I wish disks about Windows Server 2012, but not how to set the MPIO.

Do you know how to do this?

regards

 
 
 
P.S.This thread has been moved from HP StoreVirtual / HP LeftHand Storage to Storage Area Networks (SAN) (Enterprise)- HP Forums Moderator
4 REPLIES 4
oikjn
Honored Contributor

Re: Configure Windows Server 2012 MPIO with 3PAR

I think you are in the wrong forum for that.

StuartA46
Frequent Advisor

Re: Configure Windows Server 2012 MPIO with 3PAR

I know how to do it for W2K8.  would that help?

 

  Stuart A.

Sheldon Smith
HPE Pro

Re: Configure Windows Server 2012 MPIO with 3PAR

Documented in the HP 3PAR Windows Server 2008 and Windows Server 2012 Implementation Guide. Basically the same as for Windows 2008.
Note Chapter 6 about allocating storage, especially quick formatting TPVVs under 2012. You really really need to use the "fsutil" commands before and after as documented.


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

Bart_Heungens
Honored Contributor

Re: Configure Windows Server 2012 MPIO with 3PAR

Here is the link to the document

 

http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=5044394&targetPage=http%3A%2F%2Fbizsupport2.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc03290621%2Fc03290621.pdf

 

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !