HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Controller Nodes not visible in 3PAR StoreServ

 
SOLVED
Go to solution
vmuniverse
Advisor

Controller Nodes not visible in 3PAR StoreServ

I have noticed that my Controller Nodes and Ports are not visible anymore in 3PAR StorServ (3.2.023766)
When I go to Block Persona --> Hosts and show Map, it doesn't show the two controller nodes anymore
I have two switches are HP SN3000B (firmware 8.1.1) Both are SmartSAN enabled (license available)
The HP3Par firmware is 3.3.1.269 (MU1)+P07,P11
The VSP is 5.0.1.0-23799
 
When I look in the 3PAR StoreServ --> Storage Systems --> Ports, I see "No Ports"
My Hosts do have a connection to the 3PAR LUNS
4 REPLIES
Cali
Honored Contributor
Solution

Re: Controller Nodes not visible in 3PAR StoreServ

I have seen this Issue on 4 Systems with 3.3.1 and SSMC.

Sloution:

Login to SSMC as Administrator, remove and add the 3PAR.


======================
That was not planned in this way.

Re: Nodes not visible in SSMC

Are they visible in the CLI?

shownode  showport

Cali
Honored Contributor

Re: Nodes not visible in SSMC

Yes. Only SSMC problem.

======================
That was not planned in this way.
vmuniverse
Advisor

Re: Nodes not visible in SSMC

Remove and add to the SSMC console did the trick!

Thanks!