3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Guest File System:/altroot Partition Utilization

 
paymanzox
Advisor

Guest File System:/altroot Partition Utilization

Hello everyone;

After Install Update and Patch For VSP in vROPs we have this alarm:

"has symptom Guest file system space usage at critical level - Guest File System:/altroot

Partition Utilization (%) 99.451 > Threshold (%) 95.0"

I now altroot location for old firmware but how i can remove this old file 

note, I Cleaned Sp from "Cleanup Sp file Option" But problem exist yet

Thank You

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Guest File System:/altroot Partition Utilization

I don't think there is anything you can do other tan increasing the virtual disk itself.

 

If this is not working, consider to install the vSP from scratch (a couple of minutes work). Consider to restore the settings from the rescue (backup)  file.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: Guest File System:/altroot Partition Utilization

I believe HPE 3PAR Support can get "under the hood" to clean it up further. I suggest opening a support ticket.


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo