Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 3PAR 7200 and BL870c i2

emfelix
Occasional Visitor

HP 3PAR 7200 and BL870c i2

Anyone knows how can I configure a BL870c i2 on management console 4.4.0.23 3par?, recently we acquired a HP 3par 7200, but I couldn't configure it with BL870c i2 server for this is QLogic QMH2462 4Gb FC HBA, on the HP B-series 8/24c SAN Switch I can see both devices(3par, and bl870c), this is more information about it:


# FC-TACHYON-TL B.11.31.1003 FibreChannel (TD) Driver
# FC-TACHYON-TL.FC-TL-KRN B.11.31.1003 Fibre Channel Tachyon TL/XL2 Kernel Module
# FC-TACHYON-TL.FC-TL-RUN B.11.31.1003 Fibre Channel Tachyon TL/XL2 User Space Files

3 REPLIES
Sheldon Smith
Honored Contributor

Re: HP 3PAR 7200 and BL870c i2

Do you need to add any drivers for the HBA to whatever your operating system is?

 

Have you added the zone or zones on the SAN switch to allow traffic between the BL870 and the 7200?
And did you enable the new configuration?


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!
emfelix
Occasional Visitor

Re: HP 3PAR 7200 and BL870c i2

 

 

No, I don't add any driver for the HBA, because we have a EVA 4400 as well, and the BL870 is working good with this. 

 

 

 

I have added zones on the SAN switch and I couldn't connect these devices through the SAN

 

 

I'm not sure what you mean about the new configuration, could you please explain me?


Sheldon Smith wrote:

Do you need to add any drivers for the HBA to whatever your operating system is?

 

Have you added the zone or zones on the SAN switch to allow traffic between the BL870 and the 7200?
And did you enable the new configuration?


 

Sheldon Smith
Honored Contributor

Re: HP 3PAR 7200 and BL870c i2

After creating the new zones for the BL870 to the 7200, they need to be added to whatever zoning configuration is currently active. And then the updated switch configuration needs to be enabled.


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!