3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

 
amir4982
Visitor

HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

HI 

after load HP OS 3.3.1 EMU1 with VSP 5.0.6 when start install alert don't have the authority to perform the update.

 

2 REPLIES 2
Highlighted
Torsten.
Acclaimed Contributor

Re: HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

Did you use the hpepartner user? The admin user cannot do upgrades.

 

However, you should upgrade to MU2 or MU3.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
amir_sh
Frequent Advisor

Re: HP 3par OS 3.3.1 EMU1 upgrade after upload ISO don't have the authority to perform the update

hi

current firmware is 3.2.2 EMU4 i can direct upgrad to 3.3.. EMU1 .

my current VSP VER is 5.0.6  upload  the OS 3.3.1 and verify sucessfuly but when want to upgrad show you dont have  authority to perform the update.