3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE 3PAR same physical HDD showing two ID (7200)

 
Highlighted
lucky_chang
Visitor

HPE 3PAR same physical HDD showing two ID (7200)

HP-3PAR cli% showpd

Id CagePos Type -State- Size Volume Spare Free Unavail Failed

39 1:15:0? FC  failed 
48 1:15:0   FC  normal

Max HD number 0~47 , Why is there an ID 48?

Question 1:

dismisspd 39? keep id 48 

Will it be correct?

Question 2:

dismisspd 39 and dismisspd 48

admitpd  

Will it be correct?

 

thanks help

3 REPLIES 3
Highlighted
Cali
Honored Contributor

Re: HPE 3PAR same physical HDD showing two ID (7200)

Why is there an ID 48?

>Because the new Disk get the next free Disk ID
(The Disk ID is not related to the Position)

dismisspd 39? keep id 48 
Will it be correct?

> I would do this, but wait for a second answer, or Call the Support


======================
That was not planned in this way.
Highlighted
sanj_s
HPE Pro

Re: HPE 3PAR same physical HDD showing two ID (7200)

Dear  Lucky_Chang,

The PD 48 is the replacement PD for the PD ID 39.

Upon successful completion of "servicemag resume"/rebuild of the drive at 39 the old PD ID 39 should get dismissed.

If due to some reason if this does not gets dimissed then following needs to be checked.

  • Execute the command the servicemag status -d 1 15

     The output should be either

     No servicemag operations logged.

    or

    The last line of the output should be 
    servicemag resume 1 15 -- Succeeded

  • Execute the command showpdch -from 39
    if the output is " No chunklet information available"  the drive can be dismissed with the command dimisspd 39.

 

  • There is no need to dimisspd 48 as it is normal and is in used.
  • admitpd needs to be done if the new PD has been installed . 

Please let us know the result of this.

Regards,
I am an HPE employee.

 

 


Accept or Kudo
Highlighted
lucky_chang
Visitor

Re: HPE 3PAR same physical HDD showing two ID (7200)

 

showpdch -from 39 => " No chunklet information available" 

dismisspd 39 and keep 48

The current check is normal

Thanks for your help