3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

How does one enable mutipathing in 3par

 
Highlighted
Donny Jekels
Respected Contributor

How does one enable mutipathing in 3par

We are using a 3Par 7200 it has 2 controllers and each have 2 x 10G NIC's each with their own IP's.

I want to enable multipathing for each LUN and balance it over all 4 NIC's

"Vision, is the art of seeing the invisible"
1 REPLY 1
Highlighted
Veena_G
HPE Pro

Re: How does one enable mutipathing in 3par

There is no specific option to enable multipathing in 3PAR.

Multipathing can be enabled on host end depending on OS

To check if the path are redundant from 3par end, you can use below comamnd

# showhost -pathsum

You could refer below document for windows host (Refer page number -17)

https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04448812-6.pdf

For Vmware vspher 6.5 (Refer page number-5)

https://h20195.www2.hpe.com/V2/getpdf.aspx/4AA4-3286ENW.pdf


I Work for HPE

Accept or Kudo