HPE Community
HPE 3PAR StoreServ Storage
1751738 Members
5985 Online
108781 Solutions
New Discussion

Re: How to regenerate a new VSP for my existing 3par 8000

 
Yaboto
Super Advisor

‎12-03-2018 05:53 AM

‎12-03-2018 05:53 AM

How to regenerate a new VSP for my existing 3par 8000

Hi,

I moved the vsp from one esx host to another, few days later I noticed the vsp could not be ''pinged'' because the vsp vm adapter could not bind to the physical. Since the troubleshooting is taking long and very frustrating, I have decided to regenerate a new vsp for the 3par 8000 storage.

Please help me with the procedures the methods or the process to achieve regenerating a new vsp for an existing 3par 8000.

Thanks

Yaboto

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎12-03-2018 10:21 AM

‎12-03-2018 10:21 AM

Re: How to regenerate a new VSP for my existing 3par 8000

Just install and configure the new vSP (network, contact, etc), then add the "existing 3PAR".


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.